Site Marking Services

Discover decorative and safety-enhancing markings for parking areas, schoolyards, industrial sites and public spaces. Explore our marking solutions, materials and creative applications.

What Is Site Marking?

Site marking covers decorative and safety-enhancing markings applied to surfaces outside the traditional road network. It helps organise movement, highlight hazards and create attractive, functional environments for pedestrians, cyclists and vehicles.

Site marking is commonly applied in parking areas, schoolyards, playgrounds, industrial sites, warehouses, logistics areas and public squares. As part of a broader approach to safe and accessible environments, site marking contributes to clearer guidance, better use of space and safer surroundings for everyone who uses them.

Applications

Site marking is used in a wide range of public, commercial and industrial environments, including:

Why Site Marking matters

32%

more active play in marked schoolyards.

Research comparing eight schools found that moderate to vigorous physical activity levels were 32% higher for children on playgrounds with brightly coloured markings than on playgrounds without markings. Colourful games and patterns turn ordinary schoolyards into inviting spaces for play and movement.

49%

of trips to work and education in Copenhagen are by bike.

In 2018, 49% of all trips to work and education in Copenhagen were made by bicycle. Nordic cities show what is possible when cycling is made easy, and clear cycle path markings, symbols and coloured surfaces are part of creating routes that feel safe and intuitive.

road deaths per million inhabitants in Sweden – among the lowest in the EU.

Sweden and Denmark had the safest roads in 2025, with low fatality rates of 20 and 23 deaths per million inhabitants, respectively. Well-marked crossings, walkways and parking areas are part of the everyday environments that support this safety culture

Transport & Environment, Car charging & AFIR targets: where do we stand?: https://www.transportenvironment.org/articles/car-charging-afir-targets-where-do-we-stand
City of Copenhagen, The Bicycle Account 2018: https://kk.sites.itera.dk/apps/kk_pub2/pdf/1962_fe6a68275526.pdf
European Commission (2026), EU road deaths drop by 3% in 2025: https://cyprus.representation.ec.europa.eu/news/eu-road-deaths-drop-3-2025-2026-03-24_en

Materials used in site marking

With extensive experience in road marking and surface treatment, Saferoad brings proven expertise to site marking in public, commercial and industrial environments. This experience is key to creating durable, attractive and safety-enhancing markings that perform well in demanding everyday use.

Most site markings are applied with paint, cold plastic or thermoplastic, chosen for their durability, colour stability and adhesion to asphalt and concrete. Preformed thermoplastic markings are often used for decorative designs, symbols and games, as they allow detailed shapes and bright colours to be applied quickly and precisely. Anti-skid aggregates can be added to improve grip for pedestrians and cyclists. The right material supports long-term performance across parking areas, schoolyards, industrial sites and public spaces.

Standards and requirements for site marking

EN 1436

EN 1436 is the European standard for road marking performance and also applies to markings in parking areas and other trafficked surfaces. It defines requirements for visibility in daylight and darkness, colour and skid resistance, expressed in performance classes that can be adapted to each site.

Parking Areas

Parking markings make the most efficient use of available space. Bay sizes, accessible parking spaces, EV charging bays and pedestrian routes are designed according to national and local requirements, with clear symbols and contrasting colours to make each area easy to recognise.

Schoolyard-Adapted Markings

Markings in schoolyards and playgrounds must be safe for children to walk, run and play on. Materials are chosen for good slip resistance, durability and bright, long-lasting colours, while designs are adapted to the age group and the intended use of the area, from games and learning tools to safe walking routes.

Project-Specific Requirements

Every site has its own layout, surface and user needs. Marking materials, colours and designs are therefore adapted to the requirements of the property owner, municipality or school, as well as to local regulations and the expected traffic load.

Cycle Paths and Cycle Lanes

Cycle path markings separate cyclists from pedestrians and vehicles and show where each road user should travel. Lines, cycle symbols and coloured surfaces make routes easy to follow, while markings at crossings and junctions draw drivers’ attention to where cyclists are present. Materials with good skid resistance are essential, as cyclists are especially sensitive to slippery surfaces in wet conditions.

Site Marking FAQ

When is site marking needed?

Site marking is needed wherever vehicles, cyclists and pedestrians share space outside the public road network, such as parking areas, schoolyards and industrial sites. It helps organise movement, highlight hazards and make the most efficient use of available space.

What factors influence the choice of marking?

The choice depends on the surface, expected wear, the type of users, desired service life and the purpose of the marking. A busy parking entrance needs a more durable material than a decorative game in a quiet schoolyard.

What is the difference between decorative and safety markings?

Safety markings guide traffic and highlight hazards, for example pedestrian crossings, walkways and stop lines. Decorative markings add colour, play and learning to spaces such as schoolyards and public squares, while often also encouraging safe behaviour.

Can markings be adapted for schoolyards and playgrounds?

Yes. Schoolyard markings can include games, learning tools and safe walking routes, designed for different age groups. Materials are chosen for good slip resistance and bright, long-lasting colours.

Can you mark EV charging bays and accessible parking spaces?

Yes. Parking areas can include EV charging bays, accessible parking spaces, family parking and pedestrian routes, marked with clear symbols and contrasting colours according to national and local requirements.

Can site markings be used on cycle paths?

Yes. Lines, cycle symbols and coloured surfaces help separate cyclists from pedestrians and vehicles and make routes easier to follow, especially at crossings and junctions.

How long do site markings last?

Service life depends on the material, traffic load and surface condition. Paint may need renewal more often in high-traffic areas, while cold plastic and thermoplastic markings generally last considerably longer

Are all site markings the same?

No. Each site has its own layout, surface and user needs, so materials, colours and designs are adapted to the requirements of the property owner, municipality or school.

Why Saferoad?

With extensive experience in road marking and surface treatment, Saferoad delivers durable and creative site markings for public, commercial and industrial environments. Our solutions support parking areas, schoolyards, cycle paths and industrial sites with markings designed for long-term performance and project-specific requirements.

Get in touch with our teams